Share this post
Roof Flashing 101: Explained By Your Local Dallas Roofing Contractor

An entire roofing system depends on the peak performance of all of its components to keep the entire structure safe, dry, and comfortable. For this reason, one of the most critical pieces of a roof system is the flashing. If you are like most homeowners, you probably do not know what roof flashing is so read on as your preferred Dallas roof repair explains.

What Is Roof Flashing?

Flashing is commonly a piece of rust-proof metal but occasionally copper, lead, or a soft material called roll flashing can be used. The material is measured and formed to meet any section of the roof that is vulnerable to leaks and water damage, such as the valleys of a roof.

Types of Flashing

There are several varieties of flashing that perform distinct functions. Here are some of the most common ones.

  • Chimney Flashing As the title implies, this kind of flashing is utilized by a Dallas roofer around the critical parts of the chimney, particularly along the bottom to keep water out.
  • Continuous Flashing This shields the gap s between a vertical wall and a pitched roof.
  • Drip Edges These are situated at the eaves and the sides of the rakes to stop water from leaking beneath them.
  • Skylight Flashing Considering a section of the roof has to be taken out to install a skylight, flashing is required to prevent moisture from entering your Dallas roofing.

There are additional varieties of roof flashing and each is designed to keep your roof intact and your home dry. Clearly, flashing is an indispensable part of an entire roof system. Therefore, you want to hire a top-tier Dallas roofing service that is factory-certified by leading roofing manufacturers like Anderson Restoration is.

CALL ANDERSON RESTORATION NOW AT (817) 226-2111

Proper installation and quality material choices should be made with close consideration. To achieve the most desired results only hire the best!

Posted by: Admin
March 10, 2020
Go Back
Close [x]